Seagate seatools for dos11/14/2023 If the drive is on a controller card then it is possible that the set drive size command may not work. Make sure the drive is connected directly to the motherboard and not to a third-party controller card. If a message in red displays, then an error occurred. Remove the SeaTools diskette/CD, power off the computer for a few seconds, then reboot and check the capacity of the drive again in the BIOS. If you get an OK message in white in the middle of the screen, then the process was successful. Click the "R - Reset to Maximum" button.Click "C - Set Capacity" at the top of the screen.If this is not the current drive, click the "D - Drive" button in the upper left until you see the drive you want to test displayed in the middle of the screen. The model number of the drive currently selected is displayed here. You can see what device is selected by looking in the middle of the screen. Look at the bottom portion of the window to see what drives are listed and what device number they are. Now choose the drive for which to set the size.Click "I agree" to the license agreement.Once booted from the SeaTools for DOS diskette or CD, the computer should display a screen with a license agreement. 137GB or 32GB) and it is a computer that should support a drive that large, then this would be a time to set the drive size. For example, if the drive is showing up as a smaller capacity in the BIOS (i.e. Please note: If the SMART Status reads: Unsupported, stop and let me know.Sometimes it is necessary to use the SeaTools for DOS software to get the drive back to its native capacity.Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply.Please copy and paste these results in your next reply or take a screenshot Once the test is over, the results will be displayed at the bottom of the window.Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete).Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name).It will either read: Enabled, in which case you should do the following: You should see something called: SMART status. Identify your drive in the list (if recognized by the tool), and hover your mouse over it. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program. Download the portable version of GSmartControl and save it on your Desktop.See this Sysnative thread by Softwaremaniac - Win 10 Freezing and DISM and SFC won't completeįull instructions by softwaremaniacFollow the instructions below to check your SMART status with GSmartControl: Get access to BIOS settings & Boot Menu: F-keys/Hotkeys by System Manufacturer (OEM)ĭownload GSmartControl from On most systems, you press and/or tap an F-key repeatedly during boot-up to bring up the BIOS menu. Here is a listing of the BIOS key sequence by system manufacturer, which will cause your system to boot, then bring you to the BIOS screen. It is very important to have the correct model number to ensure that you are provided with the correct instructions. The model number can usually be obtained from the sticker found on the case of a desktop PC or from the label on the bottom of a laptop. If you require assistance to change your BIOS settings to ensure that the USB ports are first in line during boot-up, simply post your system manufacturer's name and the EXACT model number of the system. To successfully boot from the USB stick, you MAY require a BIOS "Firing Order" change to ensure that the system looks to the USB ports first for bootable media - before looking/ defaulting to the hard drive or CD/DVD drive to boot your system. I checked at the SeaTools site and found that they offer a tool/app, filename = USBbootSetup-SeaToolsBootable.zip that you can download run the EXE inside the zip file ( SeaToolsBootable_RC_2.1.2.usbBootMaker.exe) and create a bootable USB stick for SeaTools with DOS on it.Īs with the CD/DVD, you will obviously be booting from the media device that you just created - the USB stick.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |